Toshiba e-STUDIO 5525AC
55ppm A3 Colour Photocopier
The Toshiba e-STUDIO 5525AC prints and copies in colour or black and white at up to 55ppm on A4 and 27ppm on A3. It suits teams producing longer reports and repeated document packs, with optional external stapling, booklet-making and hole punching to reduce manual assembly. Available to buy, lease or rent from Camelott®, with UK-wide service and repair support.
The Toshiba e-STUDIO 5525AC is a 55ppm A3 colour multifunction photocopier, printer and scanner. It is worth considering when longer reports, repeated sets or larger-format documents create a regular queue on a shared machine. This Toshiba 5525AC photocopier delivers up to 27ppm A3, with optional 300-sheet single-pass scanning, 300gsm main-cassette support and compatible external stapling, booklet and punching options. Available to buy, lease or rent, with UK-wide service and repair from Camelott®. The range photograph includes optional drawers; confirm the feeder, stand, paper capacity and finishing supplied.
Camelott® 360° view
Toshiba 5525AC Photocopier: More Time Back on Longer Runs
Most useful when printing builds into substantial batches rather than a handful of short jobs. At 55ppm A4 and 27ppm A3, the 5525AC gives a shared office more output capacity for recurring reports, teaching sets, training packs and larger spreadsheets. Paper handling and suitable finishing help staff make use of that speed.
A 500-page A4 run represents about 9 minutes 5 seconds of engine time, compared with 11 minutes 7 seconds at 45ppm: roughly 2 minutes 1 second less. These are theoretical engine figures before processing, the first page, media changes, duplexing or finishing. Repeated batches are where the difference becomes useful.
The extra speed is not a strong reason to upgrade for tiny jobs. First-copy figures are only about a tenth of a second quicker than the 45ppm family model, and published low-power recovery is longer. Likewise, scanning uses the same optional feeder ratings as slower models. Choose the 5525AC when its sustained output addresses a real part of your workload.
Click the part you want to understand
Explore the e-STUDIO 5525AC Part by Part
Select an area to see the specification, what it means in practice, and when it will—or will not—make a meaningful difference.
1. Document feeder & scanning
Keep Large Original Files Moving Through the Office
Choose the original feeder around the scanning task. The 55ppm print engine does not increase the top DSDF scan rating.
Why this is useful
The optional DSDF captures both sides in one pass, useful for contract files, accounts records and double-sided packs. Its 300-sheet capacity can reduce the number of loads for substantial files. A version with double-feed detection is available.
What to weigh up
Some comparable 55ppm equipment also offers a 300-sheet feeder, and some configurations include single-pass scanning. Compare the full supplied price and the actual original handling. If printing is light, a slower engine with the right feeder may cover the scanning just as well.
2. Touchscreen & workflow
Make Repeated Pack Settings Easy to Recall
The 10.1-inch multi-touch panel and e-BRIDGE Next platform can be configured for the jobs different teams repeat.
Why this is useful
A saved setting for a duplex training pack or a regular accounts scan can reduce the setup each user has to remember. Compatible apps can support cloud destinations, with permissions and file settings agreed during installation.
What to weigh up
A large panel alone does not make a workflow efficient. Configure the functions staff actually use and show them how to repeat the job. *App availability, subscriptions, permissions and licences must be confirmed; every connector is not automatically included.
3. Print engine
55ppm A4 / 27ppm A3: Built Around Longer Batches
The main reason to move to this speed is less engine time on repeated output, rather than a dramatic change to the first copy.
Why this is useful
For 300 A4 pages, theoretical engine time is about 5 minutes 27 seconds rather than 6 minutes 40 seconds at 45ppm. A saving of around 1 minute 13 seconds can be useful when several departments need repeated sets through a busy day.
What to weigh up
First-copy figures improve by only about 0.1 seconds over the 45ppm family model. Published recovery from low power is approximately 20 seconds, compared with 12 seconds on that model. Short, infrequent jobs may gain little; test a real sequence from the state the machine normally sits in.
4. Bypass & specialist media
Give Occasional Media Its Own Loading Path
The 100-sheet bypass lets suitable specialist jobs run while ordinary A4 and A3 stocks remain in the main drawers.
Why this is useful
A suitable certificate, cover or banner can be produced between larger ordinary-paper runs without replacing a main drawer stock. This is useful where a shared device handles both routine reports and occasional presentation work.
What to weigh up
The 55ppm rating is not a promise for every stock or banner. Automatic duplex supports 60–256gsm, and banners have a separate 90–163gsm range. Use approved media and check size, feeding and finishing restrictions for the actual job.
5. Main paper drawers
Keep the Faster Engine Supplied with the Right Stock
Standard input is two 550-sheet cassettes and a 100-sheet bypass. Further capacity depends on the optional feeding equipment.
Why this is useful
Separate drawers for A4, A3 and approved heavier covers can prevent a paper change between repeat jobs. Main-cassette support to 300gsm is useful against equivalent configurations whose ordinary drawers stop at 256gsm, even if their bypass also accepts 300gsm.
What to weigh up
Maximum capacity is not standard, and some equivalent machines offer higher totals. Choose extra drawers or large-capacity feeding when they avoid genuine reloads or keep frequently used stocks ready. Confirm which sizes each optional feeder supports.
6. Output & finishing
Specify External Finishing Around the Finished Document
The 5525AC uses compatible external finishing options. The compact inner finisher offered on lower-speed models in this family is not the option for this machine.
Why this is useful
An external stapler can remove repeated hand assembly from reports and teaching sets. A saddle-stitch finisher adds folded, centre-stapled guides, while a compatible punch prepares binder packs. Check the required bridge kit and complete installed space as part of the proposal.
What to weigh up
Other machines can offer different folding functions or larger booklet capacities. *Limits depend on accessory, paper size, weight and cover combination; A3 stapling limits are lower. A 60-page booklet is not 60 sheets. Maximum print weight is not a stapling or folding limit.
Photocopier terminology, explained by Bean
Confused by Photocopier Jargon?
Bean explains the terms without the technical waffle. Here is what the specifications mean for your working day.
- PPM — Pages Per Minute
- Printer PPM measures pages produced per minute once the print engine is running, under specified test conditions. The difference between 45ppm and 55ppm matters much more on a 100-page job than a five-page job, where processing and the first page account for more of the wait.
- IPM — Images Per Minute
- Scanner IPM normally measures scanned sides, not sheets. One double-sided sheet counts as two images. A high figure helps with large scan batches, but resolution, OCR, file processing and upload speed can still slow the complete job.
- GSM — Grams Per Square Metre
- GSM describes paper weight per square metre; ordinary office paper is often 80gsm. Support for 300gsm can help with covers and certificates, but adds little if you only print standard paper. Check the tray and duplex limits too: this model’s automatic duplex limit is 256gsm.
- MFP — Multifunction Printer
- One device combines printing, copying and scanning; fax may be optional. Sharing an MFP saves space, but a busy scan or copy session can create a queue, so consider how many people need it at once.
- ADF — Automatic Document Feeder
- An ADF feeds a stack of originals into the scanner, saving you from placing every page on the glass. Capacity matters for long batches. ADF alone does not tell you whether both sides are scanned automatically; check the feeder type.
- DSDF — Dual Scan Document Feeder
- A DSDF scans both sides of an original in one pass, without turning the sheet over. It is especially useful for large double-sided document packs. On the 5525AC, the 300-sheet DSDF is an option, so check that it is included.
- RADF — Reversing Automatic Document Feeder
- A RADF scans one side and reverses the sheet to scan the other. It still handles double-sided originals automatically, but the reversing step makes it slower than a dual-scan feeder. It can be quite sufficient for occasional smaller batches.
- DADF — Duplexing Automatic Document Feeder
- DADF describes an automatic feeder that handles double-sided originals. Check whether the actual configuration scans both sides in one pass or reverses each sheet: the mechanism, scan speed and capacity matter more than the initials. A standard single-pass feeder can offer good value when it handles your normal batches without an upgrade.
- Duplex — Automatic Double-sided Printing
- Automatic duplex prints on both sides without manually reloading the paper. It saves paper and reduces bulky packs. It does not mean double-sided scanning, and supported paper weights can be lower than for single-sided printing.
- DPI — Dots Per Inch
- DPI describes resolution: how many dots are printed, or how finely a scan samples detail, per inch. Higher settings can help fine text and images, but scanning at higher resolution creates larger files and can slow the workflow. Match the setting to the task.
- CPC — Cost Per Copy
- CPC is the charge per copy or printed page under a service arrangement, normally with different rates for mono and colour. Ask what is included, how A3 and double-sided pages are counted, and whether minimum billing applies. Compare the rates against your actual usage.
- FCOT — First Copy Out Time
- FCOT is the time to produce the first copy under the manufacturer’s test conditions. It is not PC-to-first-printed-page time: a PC print job can also involve the computer, application, driver, network, server or cloud, copier processing and print engine. Sleep state can add a further wait.
- A4 / A3 — Paper Sizes
- A4 is 210 × 297mm, the usual office page. A3 is 297 × 420mm, twice the area of A4, useful for plans, larger spreadsheets and folded A4 booklets with suitable finishing. If you never use A3, a smaller A4 device may suit a lighter workload, but check paper capacity, sustained use and any finishing attachments you may need later.
- Booklet Maker — Folded, Stapled Booklets
- A booklet maker folds sheets down the middle and staples along the fold to produce a finished booklet. With suitable paper and finishing, A3 sheets become an A4 booklet and A4 sheets become an A5 booklet. Useful for handbooks, programmes and training guides. It is a separate finishing requirement from corner stapling: check that the compatible booklet finisher is included and that its sheet and paper-weight limits suit your documents.
- Hole Punch — Pages Ready for Binders
- A compatible hole-punch option makes holes in printed sheets so packs are ready for folders or ring binders, saving staff from punching each batch by hand. Check the hole pattern, supported paper sizes and weights, and the required finisher combination. If you regularly prepare binder packs—or expect to later—choose a machine that accepts the necessary attachment.
- Corner Staple — Keep Each Set Together
- Corner stapling puts a staple near the corner of each printed set, keeping meeting papers, reports and teaching packs together. It can save time when you repeatedly produce multiple sets; for an occasional short document, a separate stapler may be sufficient. Check the compatible finisher’s sheet limit and staple positions. Corner stapling does not fold pages or make a booklet.
Specifications in real life
What the 5525AC Figures Mean for Busy Print Periods
Use your normal batch sizes to judge the benefit, and keep paper handling, scanning and pack preparation in the same conversation.
Useful when: longer reports or repeated sets create a regular queue.
Engine-time illustration: 500 A4 pages take about 9 minutes 5 seconds, around 2 minutes 1 second less than 45ppm. Processing, first-page time and finishing are additional.
Useful when: larger worksheets, spreadsheets or suitable booklet sheets form real recurring work.
Use the A3 figure: 100 A3 pages represent about 3 minutes 42 seconds of engine time, roughly 51 seconds less than 22ppm.
Useful when: approved heavier covers and certificates need to stay ready in a drawer.
Check each paper path: automatic duplex supports 60–256gsm. Banner, original-feeder and finishing limits are separate.
Useful when: substantial files would otherwise need splitting into smaller feeder loads.
Compare the configuration: this DSDF is optional. A 300-sheet feeder is also available on some equivalent 55ppm equipment.
Useful when: single-pass capture suits double-sided originals at the specified 300dpi settings.
Check complete file time: IPM counts scanned sides. Resolution, OCR, processing and upload can affect when the document is ready.
Useful when: staff need to understand short-copy response as well as sustained speed.
Small change from 45ppm: first-copy figures improve by only about 0.1 seconds. Low-power recovery is approximately 20 seconds and is a separate measurement.
Think about the whole document job
Where the 5525AC Could Make a Practical Difference
The strongest reasons to choose this model are recurring batch output, useful A3 speed and a configuration that reduces the handling around those jobs.
The saving grows with the batch
At 55ppm, 500 A4 pages represent about 9 minutes 5 seconds of engine time, compared with 11 minutes 7 seconds at 45ppm. Roughly two minutes can matter when runs repeat. It is an engine-time example, not a promise for a finished duplex or stapled job.
A useful step where the bigger sheets matter
The 27ppm A3 rating is relevant to repeated large spreadsheets, plans and suitable booklet sheets. A theoretical 100-page A3 run is about 3 minutes 42 seconds. Use this figure rather than the A4 headline when much of the work is larger format.
Keep frequently used heavier stock loaded
Support to 300gsm in the main cassettes can help when a cover or certificate stock is used regularly. Some equivalent 55ppm configurations limit ordinary drawers to 256gsm. Verify the approved stock and settings; 300gsm does not extend the automatic duplex limit beyond 256gsm.
Avoid moving the queue to a staff desk
If staff repeatedly staple reports or punch training packs, external finishing can remove a separate manual step. The right choice depends on the finished set: corner stapling, folding into booklets and binder punching are different requirements.
Plan for the complete external finisher
The base machine has a compact published footprint for its functions, but that is not the installed footprint. External finishing and bridge equipment add space. The lower-speed family models offer an inner finisher that is not compatible with this model, so include a layout check.
Reduce preventable interruptions
With a faster engine, reloading or changing paper can become a more noticeable interruption. Extra drawers can keep sizes and stocks ready, while compatible large-capacity options can support longer ordinary-paper runs. Choose capacity that solves an actual task.
Keep the scan decision separate
The optional 300-sheet DSDF and up to 240ipm at 300dpi remain shared with slower family models. If scanning dominates and print queues are rare, a lower-speed configuration with suitable single-pass scanning may make better use of the budget.
Check the wait from the normal sleep state
First-copy figures are approximately 5.6 seconds colour and 4.3 seconds mono, barely changed from the 45ppm family model. Published low-power recovery is about 20 seconds. For occasional short work, sustained speed is less important than the whole wait and complete cost.
Measure the difference on your own jobs
A 60ppm engine has around 45 seconds of theoretical advantage over 55ppm on 500 A4 pages. That may matter for repeated long runs, but paper changes, processing and finishing can outweigh it on mixed office work. Compare a representative finished job.
Check pack size before selecting the accessory
A supported booklet option can handle up to 60 pages under the stated conditions. Other configurations may suit larger booklets or different folds. Confirm future booklet, punch and staple requirements now, alongside workload and service expectations.
Choose around repeatable benefits
The 5525AC Is a Good Fit When...
It makes sense if you...
- Produce recurring longer A4 reports or multiple document sets
- Need 27ppm A3 output for a genuine larger-format workload
- Want approved heavier stocks ready in appropriate main drawers
- Can use external stapling, booklet making or hole punching
- Have space for the complete equipment and working access
- Need optional large-batch scanning as well as sustained printing
- Can justify the equipment and service cost through repeated work
We would look at something else if you...
- Mainly send a few short A4 jobs without inline finishing
- Expect a dramatic first-copy improvement over the 45ppm family model
- Need a faster scanner but have little use for additional print speed
- Require the compact inner-finisher arrangement of a lower-speed model
- Need larger booklets or folding functions beyond the chosen accessory
- Assume the 55ppm figure guarantees all media or finishing throughput
- Have queues that a sample job shows need a different speed or configuration
Equipment and support around your business
Buy, Lease or Rent the 5525AC with UK-wide Service & Repair
Choose how you obtain the machine, then agree the support that keeps it useful in your workplace. We explain equipment costs and service terms separately.
Purchase the configuration you need
Buy a Toshiba e-STUDIO 5525AC outright, with the feeder, paper capacity and finishing selected for your work. Ask about available new and professionally prepared used equipment, the supplied condition, warranty and service options.
Spread the equipment cost
A lease can spread the equipment cost over an agreed term. We explain the payments, term and end-of-agreement arrangements, with service charges shown separately. Finance is subject to the provider’s approval and agreed terms.
Discuss a rental for your circumstances
Rent the 5525AC where the available equipment and rental arrangement suit your requirements. Tell us the intended period, location, expected use and finishing needs so we can confirm availability, delivery, collection and the applicable terms.
Support beyond supplying the machine
Camelott® offers photocopier servicing and repair across the UK, including support for the Toshiba e-STUDIO 5525AC. Tell us your postcode and whether you need ongoing maintenance or help with a fault. We will confirm the service available, charges, inclusions and attendance arrangements for your location.
Make the configuration clear
Before Choosing a Toshiba 5525AC
A useful proposal should describe the jobs it improves, every included accessory and the ongoing service arrangement.
Which long jobs recur often enough?
Use normal batch sizes, sets and busy periods to judge the benefit of 55ppm. A rare long report is a weaker reason to upgrade than recurring shared-office runs.
What does the finished sample job take?
Time the intended file, driver, stock, duplex and finishing. Include the normal starting state. Theoretical engine-time comparisons do not include the entire workflow.
Which external finisher is specified?
Name the external stapling or saddle-stitch equipment, bridge kit and punch unit where required. The inner finisher used on lower-speed family models is not compatible with this machine.
How many sheets and pages are in each pack?
Check A4 and A3 stapling limits separately, including paper weight and covers. Booklet page counts are not sheet counts; test the longest document you need to produce.
Which feeder and scan workflow are included?
Specify the 100-sheet RADF or 300-sheet DSDF, any double-feed detection requirement, OCR capability and destination setup. Scan performance does not increase just because printing is 55ppm.
How much ready-loaded stock is useful?
The standard main drawers hold 1,100 sheets together; the 1,200-sheet total includes the bypass. Choose extra trays or large-capacity feeding for actual reloads, sizes and stock changes.
What is the complete equipment and service cost?
Compare new and professionally prepared used configurations, accessories, condition, warranty and expected support life. Ask for equipment finance and service separately. Camelott® does not use minimum billing as standard and normally recommends finance terms of no more than five years.
Will the setup suit the workload and room?
Agree expected monthly use, peak batches, CPC page counting and service coverage. Check installed dimensions and working clearances with the external finisher. Do not treat a maximum duty figure as a recommended monthly target.
Technical specification
Toshiba e-STUDIO 5525AC Specifications
Standard features and optional equipment are separated. Published speeds are maximum figures under the manufacturer’s stated conditions.
| Specification | 5525AC | What to know |
|---|---|---|
| Device type | A3 colour multifunction system | Print, copy and scan; fax is optional. |
| A4 output speed | Up to 55ppm colour / mono | A4 engine rating; real job time depends on settings and processing. |
| A3 output speed | Up to 27ppm colour / mono | The 55ppm A4 rating does not apply to A3. |
| First copy output | Approx. 5.6s colour / 4.3s mono | Manufacturer copy figures; not PC-to-first-print timing. |
| Low-power recovery | Approx. 20 seconds | Recovery and first-copy timings describe different stages. |
| RADF option | 100 sheets; up to 73ipm at 300dpi | Reverses originals for two-sided scanning. |
| DSDF option | 300 sheets; up to 240ipm at 300dpi | Single-pass duplex capture; double-feed detection version available. |
| Standard paper input | 1,200 sheets | 2 × 550-sheet main cassettes plus 100-sheet bypass. |
| Maximum paper input | 5,200 sheets | Requires compatible optional feeding equipment. |
| Main cassette media | 60–300gsm | Tray size and media settings still apply. |
| Bypass media | 52–300gsm | 100-sheet bypass; supported size/media combinations must be checked. |
| Banner media | Up to 305 × 1,200mm; 90–163gsm | Separate limits from ordinary sheet printing. |
| Automatic duplex | 60–256gsm | The 300gsm maximum is not an automatic duplex rating. |
| Print resolution | 600 × 600 dpi; 1200 × 1200 dpi mode | 1200 × 1200 dpi mode requires the PostScript driver; equivalent figures are separate. |
| Scan resolution | Up to 600 × 600 dpi | Maximum scan resolution is separate from the 300dpi speed test. |
| Control panel / platform | 10.1-inch colour multi-touch; e-BRIDGE Next | Apps and workflows depend on licensing and configuration. |
| RAM / storage | 6GB RAM / 128GB security SSD | Series brochure lists 6GB RAM for this model; confirm the supplied specification. Available storage is lower than nominal. |
| Connectivity | Gigabit Ethernet, USB 2.0; wireless options | WLAN, Bluetooth and Wi-Fi Direct require the appropriate option. |
| Base dimensions | 585 × 641 × 787mm (W × D × H) | Feeder, stand, trays, finishers and working access add to installed space. |
| Base weight | Approximately 79kg | European published base figure; confirm the supplied configuration. |
| Base output tray | 400 sheets | Finisher output capacities are separate. |
| Finishing options | External stapling, saddle stitch and compatible hole punch | External finishers require the appropriate connection equipment; accessory and paper limits apply. |
Sources: Toshiba model specification, Toshiba UK series brochure and Toshiba UK range. Paper capacities normally relate to A4 80gsm unless stated otherwise. The series brochure is used for the 6GB RAM figure; a model webpage lists a different figure, so confirm the supplied specification. Confirm the current accessory combination and supported media before ordering.
Finishing compatibility: Toshiba equipment and option specifications. External finishing is required for inline stapling on this model; check the bridge kit, punch and installed space.
Comparison context: published specifications for comparable 55–60ppm A3 colour equipment show different cassette limits and feeder capacities and different scan configurations. These are configuration comparisons, not a claim of overall superiority. Availability and test conditions vary.
Questions worth asking
Toshiba 5525AC Photocopier FAQ
Can I buy, lease or rent the Toshiba e-STUDIO 5525AC?
Yes. Camelott® offers purchase, lease and rental options for the 5525AC. The available equipment, configuration and terms depend on the proposal. Tell us your location, expected use and intended period so we can explain the suitable options and separate the equipment and service costs.
Do you provide service and repair across the UK?
Yes. Camelott® offers UK-wide photocopier servicing and repair, including support for the Toshiba e-STUDIO 5525AC. Provide your postcode, machine details and any fault information so we can confirm coverage, charges, inclusions and attendance arrangements. Do not assume a particular response time or that parts and consumables are included unless stated in your agreement.
Who is the Toshiba e-STUDIO 5525AC best suited to?
It is worth considering when longer A4 reports, repeated document sets or A3 work create regular print queues. The 55ppm A4 engine is the main benefit; paper handling and compatible external finishing should support the jobs around it.
How fast does the Toshiba 5525AC print?
Up to 55ppm A4 and 27ppm A3, in colour and mono. These are rated engine figures under specified conditions. Processing, first-page time, stock, duplexing and finishing affect the complete job.
What can 55ppm save compared with 45ppm?
A theoretical 500-page A4 engine run takes about 9 minutes 5 seconds at 55ppm rather than 11 minutes 7 seconds at 45ppm, around 2 minutes 1 second less using the unrounded figures. The complete job includes other stages; test a typical finished document.
Does it start a short copy much sooner than the 45ppm model?
No substantial improvement is indicated by the published first-copy figures: approximately 5.6 seconds colour and 4.3 seconds mono, only about 0.1 seconds quicker than that family model. Low-power recovery is approximately 20 seconds and is measured separately.
Does the 55ppm model scan faster too?
The top optional DSDF rating remains up to 240ipm at 300dpi, as on slower models in this family. Choose the scanner for the originals, batch capacity, workflow and complete file time rather than print speed.
Is the 300-sheet scanner standard?
No. The 300-sheet single-pass DSDF is optional. Confirm that it is included and whether the double-feed detection version is required. Some comparable 55ppm equipment also offers a 300-sheet feeder, so capacity is not unique.
Can the 5525AC use the compact inner finisher?
The inner-finisher option used on lower-speed models in this family is not compatible with the 5525AC. Specify compatible external finishing and any required bridge kit, and allow for the complete installed space.
Can it staple, make booklets and punch holes?
Yes, with the appropriate external finisher and compatible punch equipment. The external stapling option supports up to 65 A4 sheets at 60–80gsm under the stated conditions. A suitable saddle-stitch option supports booklets up to 60 pages. Limits change with paper size, weight and covers.
Can it print heavier stock from the main cassettes?
Main cassettes support 60–300gsm and the bypass 52–300gsm, subject to approved media and supported sizes. Automatic duplex supports 60–256gsm. Banners, original feeders and finishing have separate limits.
Should I compare it with a 60ppm machine?
For repeated long runs, yes. The theoretical difference is about 45 seconds over 500 A4 pages, but the complete configuration, paper changes, processing and finishing can matter more on mixed office work. Compare your own finished sample job and total cost.
Can it work with Microsoft 365 and Google services?
Compatible e-BRIDGE apps can support services including OneDrive, SharePoint, Google Drive and Gmail. Confirm current app availability, licences, permissions and the destinations included in the installation.
Would a slower or smaller machine be sufficient?
It may be if printing is light, jobs are short or scanning is the main task. A smaller A4 device may suit lighter A4-only work, provided its scanner, paper capacity, supported workload and future finishing compatibility meet the need.
What affects the purchase, lease or rental cost?
New or prepared-used condition, feeder, extra paper capacity, external finishing, software, rental period or finance term, and service affect the complete price. Ask for a proposal naming the supplied configuration, delivery arrangements, CPC rates where applicable and terms, with equipment and service explained separately.
Interested in the 5525AC?
Talk to Camelott® About the Toshiba 5525AC
Buy, lease or rent the Toshiba e-STUDIO 5525AC from Camelott®, with UK-wide service and repair support. Tell us your postcode, preferred arrangement and the jobs your team produces. We will recommend a suitable configuration and explain equipment, delivery and service costs clearly.